|
Clevis Fork dimensions after material removal
Date: 12/16/2013
Views: 3798
|
|
|
Oops, several dents being repaired in Port seat base, Q-Cel, 1 BID, Peel-Ply
Date: 11/30/2013
Views: 3796
|
|
|
The magic number is 1.990" from the forward pillow block bearing to the grove.
Date: 12/13/2013
Views: 3796
|
|
|
Emergency Maneuver that starts with Heim? 13 of 13
Date: 12/16/2013
Views: 3795
|
|
|
Front Cable Mount with Lever in Up Position
Date: 12/12/2013
Views: 3784
|
|
|
1/2" ball end-mill on order (McMaster) to to mill a pocket in the brake master cylinder directly above the mounting holes
Date: 12/13/2013
Views: 3784
|
|
|
5.4 oz. for bracket, pillow block and pillow block mounting hardware
Date: 11/29/2013
Views: 3776
|
|
|
3" wide x 1/8" thick 4130 Chrome Moly for bracket
Date: 11/28/2013
Views: 3772
|
|
|
New 1/4-28 nuts
Date: 11/29/2013
Views: 3769
|
|
|
Half the weight was eliminated since I first cut steel
Date: 11/27/2013
Views: 3762
|
|
|
Coupler dimensions
Date: 12/16/2013
Views: 3756
|
|
|
Eric Engineering torque wrench extension
Date: 12/03/2013
Views: 3744
|
|
|
Mill round slot in master cylinder 12 of 12
Date: 12/24/2013
Views: 3737
|
|
|
Straight ahead
Date: 11/27/2013
Views: 3736
|
|
|
Cut down Heims to 1.700"
Date: 12/13/2013
Views: 3699
|
|
|
Front threaded rod cut down to .450 (I aim for minimum of 9.5 threads of engagement on any 5/16-24 joint)
Date: 12/13/2013
Views: 3699
|
|
|
Mill round slot in master cylinder 1 of 2
Date: 12/23/2013
Views: 3695
|
|
|
Emergency Maneuver that starts with Heim? 8 of 13
Date: 12/16/2013
Views: 3694
|
|
|
Oops, fixed a dent I made with a C-Clamp when testing spar Adel clamp bracket, Q-Cel, 1 BID and Peel-Ply
Date: 11/30/2013
Views: 3674
|
|
|
ESTM-20 Specification Sheet
Date: 11/28/2013
Views: 3670
|
|