|
YouTube Channel
I've started a YouTube channel to vlog my build progress. Come check it out and leave a message!https://www.youtube.com/watch?v=OFgPUfHvLDE&list=PL2HSwhQop_QOThtzPUa_zLaMRj7qWyOv3
Date: 07/17/2021
Views: 234042
|
|
|
20141102_162118
Cut it out.
Date: 11/02/2014
Views: 53950
|
|
|
dsc08617
After removing the green tape.
Date: 04/14/2012
Views: 52947
|
|
|
p1000468
p1000468.jpg
Date: 12/09/2011
Views: 28327
|
|
|
NEX_2013-11-12-37
N111EU at rest.
Date: 11/13/2013
Views: 26443
|
|
|
Orange part created in turbocad and printed on a 3D printer from ABS. Printer is a Prusa i3 X, cost is around $300.
Orange part created in turbocad and printed on a 3D printer from ABS. Printer is a Prusa i3 X, cost is around $300.
Date: 04/03/2016
Views: 16861
|
|
|
dsc08623
bungee cord removal.
Date: 04/14/2012
Views: 14394
|
|
|
dsc08621
Removal of the brake master for the mono.
Date: 04/14/2012
Views: 14048
|
|
|
20141102_153539
Out. Ad you can see the screw is sill in the nut plate. it came out later.
Date: 11/02/2014
Views: 13871
|
|
|
dsc08622
Removed.
Date: 04/14/2012
Views: 13784
|
|
|
photo
No pictures of the progress of putting in the LG layups on the port side. Here I am putting down the peel ply.
Date: 08/20/2012
Views: 13631
|
|
|
20141102_154450
Gear cover removed, now for removing the throttle box. This is all prep work to patch up the mono wheel hole.
Date: 11/02/2014
Views: 13358
|
|
|
dsc08620
Removal of the mono firewall.
Date: 04/14/2012
Views: 13245
|
|
|
20141102_154504
Cut old fuel lines. Gona have to replace them anyways. Now I just need to remove the stop block where the gear handle went.
Date: 11/02/2014
Views: 13242
|
|
|
dsc08619
Roap tied to the engine mount frame to hoist the airframe.
Date: 04/14/2012
Views: 12957
|
|
|
dsc08618
Block and tackle used to hoist the front of the aircraft to aid in creating a jig. This hoist reduces the weight to 25%.
Date: 04/14/2012
Views: 12510
|
|
|
20141102_161000
template for new firewall.
Date: 11/02/2014
Views: 12345
|
|
|
dsc08600
Thinking of modifying the mono wheel trailer as a jig to perform the tri-gear conversion.
Date: 04/10/2012
Views: 12040
|
|
|
Wanted to make a copy of B16 to make the cuts on before I cut the actual B16 part.
Wanted to make a copy of B16 to make the cuts on before I cut the actual B16 part.
Date: 04/03/2016
Views: 11973
|
|
|
p1000473
p1000473.jpg
Date: 12/13/2011
Views: 11935
|
|