|
Temporary mount using 1 flat head 1/4-28
Date: 12/13/2013
Views: 3276
|
|
|
Coupler dimensions
Date: 12/16/2013
Views: 3756
|
|
|
Drill jig and plywood insert
Date: 11/27/2013
Views: 3273
|
|
|
Oops, fixed a dent I made with a C-Clamp when testing spar Adel clamp bracket, Q-Cel, 1 BID and Peel-Ply
Date: 11/30/2013
Views: 3674
|
|
|
Two forward and one aft 11/16 nuts get weight reduction
Date: 12/16/2013
Views: 3629
|
|
|
Cable Happy near Fuel Selector and below Air-Brake Cable 2
Date: 12/12/2013
Views: 3450
|
|
|
A shot to show where the threads end
Date: 12/16/2013
Views: 3570
|
|
|
The 11/16-16 thread is not too common
Date: 12/13/2013
Views: 3131
|
|
|
Emergency Maneuver that starts with Heim? 11 of 13
Date: 12/16/2013
Views: 4509
|
|
|
Mill round slot in master cylinder 1 of 2
Date: 12/23/2013
Views: 3695
|
|
|
Here's my extra deflection
Date: 11/27/2013
Views: 3107
|
|
|
The center hole was tapped and used for 1st test mount, a big lightening hole will eliminate it
Date: 11/27/2013
Views: 3656
|
|
|
Glass in reinforcement
Date: 11/27/2013
Views: 3093
|
|
|
The shoulder of my spacers allows for a tiny bit more deflection than without
Date: 11/27/2013
Views: 3231
|
|
|
Self Etching Primed
Date: 11/28/2013
Views: 3191
|
|
|
Front HardPoint 9
Date: 12/31/2013
Views: 4490
|
|
|
Mill round slot in master cylinder 5 of 12
Date: 12/23/2013
Views: 4325
|
|
|
Mill round slot in master cylinder 12 of 12
Date: 12/24/2013
Views: 3737
|
|
|
Front HardPoint 3
Date: 12/27/2013
Views: 4638
|
|
|
I'm going to Redux the nut in place and Redux/Flox the thread extender hang-over
Date: 12/13/2013
Views: 3386
|
|