|
Oops, a few air bubles on aft mount reinforcemelay-up, drilled holes, filled with Aeropoxy, plugged with dry flox and Peel-Ply
Date: 11/30/2013
Views: 3636
|
|
|
Straight ahead
Date: 11/27/2013
Views: 3712
|
|
|
New 1/4-28 nuts
Date: 11/29/2013
Views: 3756
|
|
|
Drill jig
Date: 11/27/2013
Views: 3528
|
|
|
Half the weight was eliminated since I first cut steel
Date: 11/27/2013
Views: 3753
|
|
|
The center hole was tapped and used for 1st test mount, a big lightening hole will eliminate it
Date: 11/27/2013
Views: 3646
|
|
|
Ready to install nut-plates
Date: 11/27/2013
Views: 4033
|
|
|
Igus bracket and spacers
Date: 11/27/2013
Views: 3119
|
|
|
1/8" 4130 bracket
Date: 11/27/2013
Views: 3219
|
|
|
You really can't see with the pillow block in place, but lightening holes under contact area
Date: 11/27/2013
Views: 4328
|
|
|
Glass in reinforcement
Date: 11/27/2013
Views: 3071
|
|
|
Just needs a pullin
Date: 11/27/2013
Views: 3849
|
|
|
You can see the locknut contacting
Date: 11/27/2013
Views: 3519
|
|
|
5.4 oz. for bracket, pillow block and pillow block mounting hardware
Date: 11/29/2013
Views: 3758
|
|
|
Igus bearings
Date: 11/27/2013
Views: 5250
|
|
|
The shoulder of my spacers allows for a tiny bit more deflection than without
Date: 11/27/2013
Views: 3221
|
|
|
Shot of 1/4" hardware spacers
Date: 11/29/2013
Views: 4144
|
|
|
Reinforcement
Date: 11/27/2013
Views: 4833
|
|
|
2011 and 4032 aluminium stock for spacers
Date: 11/28/2013
Views: 3912
|
|
|
Nut-plates
Date: 11/27/2013
Views: 4257
|
|