|
IMG_1287ann
The console cover cut out. Now I have to figure out how to make the cuts for the slots for the brake levers and parking brake. Later there will be cutouts for the flap and trim switches as well as the brake reservoir.
Date: 03/30/2011
Views: 3047
|
|
|
IMG_0925ann
Fill/sand continues on the wheel pants
Date: 03/02/2011
Views: 3018
|
|
|
IMG_1366
OK, what's different about the way the intercooler went back on? Nothing is ever easy...
Date: 05/17/2011
Views: 2779
|
|
|
IMG_1241ann
2011 03 25 Test fit of the wheel pant mounting bracket. (2nd try, BTW) This one is OK.
Date: 03/25/2011
Views: 2541
|
|
|
IMG_0002post
Date: 08/26/2010
Views: 5151
Keywords:
|
|
|
IMG_0221post
Date: 09/10/2010
Views: 2500
|
|
|
IMG_1501post
Need to keep things out of the way.
Date: 02/18/2011
Views: 2576
|
|
|
IMG_0243post
Date: 09/13/2010
Views: 2245
|
|
|
IMG_0089post
Date: 09/02/2010
Views: 2663
|
|
|
IMG_1373ann
For the last several days I had been making up a cover for the monowheel hole. Here it's ready for a test fit and any adjustments necessary.
Date: 11/17/2010
Views: 2814
|
|
|
IMG_0457ann
2010 10 20 While in Florida, I had Bud go over the aircraft to see what issues he could find. One issue was the lack of spar pin reinforcements when the cockpit module was built.
Date: 10/20/2010
Views: 2619
|
|
|
IMG_0217post
Date: 09/09/2010
Views: 2539
|
|
|
Port Flap Bracket 1
Port outboard flap bracket completed
Date: 06/29/2011
Views: 2489
|
|
|
IMG_1254ann
Removed one electric pump and the associated plumbing to greatly simplify the fuel system. The in-line filters were removed and replaced with the gascolator.
Date: 03/25/2011
Views: 2623
|
|
|
IMG_0143post
Date: 09/04/2010
Views: 2362
|
|
|
IMG_0041post
Date: 09/01/2010
Views: 3080
|
|
|
IMG_1705
May 20 2011, pretty good rain off and on all day. Not much work done.
Date: 05/20/2011
Views: 2620
|
|
|
Flap Mark Up
So it was time to commit to sticking the real markings to the flap. Flap up...
Date: 07/01/2011
Views: 3160
|
|
|
IMG_0134post
Date: 09/03/2010
Views: 2621
|
|
|
IMG_1255ann
The superfluous pump and plumbing removed. In addition, I connected the flaps to the electrical power source for the main pump (not shown). This provides power to the flaps through the old pump circuit breaker path. Tested and it works fine.
Date: 03/25/2011
Views: 2492
|
|