|
IMG_1365
Upon closer examination, the corner of the intercooler was impinging in the cowl preventing it going into place.
Date: 05/17/2011
Views: 2790
|
|
|
Starboard wing 77.
Date: 06/30/2009
Views: 2937
|
|
|
IMG_1555
Date: 06/07/2004
Views: 3315
|
|
|
101502_airbox
Date: 12/31/1969
Views: 2752
|
|
|
2004_12_20_1
Date: 02/03/2009
Views: 4050
|
|
|
Mod_70_21
Date: 04/15/2006
Views: 5153
|
|
|
Door hinge rebates 51.
Date: 11/10/2009
Views: 2433
|
|
|
DSCN5219
Date: 11/29/1999
Views: 2812
|
|
|
Isopropanol 100 Muffler 2
Date: 11/08/2007
Views: 3821
|
|
|
IMG_2345
Date: 07/21/2005
Views: 2812
|
|
|
Fred 2.
Date: 01/27/2007
Views: 3011
|
|
|
DSCN6162
Date: 10/11/2009
Views: 2666
|
|
|
IM003674
Date: 11/28/2007
Views: 3299
|
|
|
dsc08634
OK now that the plane is off the trailer and on its own wheel we were able to remove most of the trailer hardware and position the ribs. We also used the main bolts to hold the first rib in place. The other rib was left a little lower to be located once
Date: 04/15/2012
Views: 6438
|
|
|
Riga Latvia.EVRA
Riga Latvia EVRA
Date: 06/07/2005
Views: 4003
|
|
|
GJ7I2484
Date: 07/09/2006
Views: 3031
|
|
|
IMG_5740Ann
Date: 10/26/2007
Views: 2637
|
|
|
IMG_2526
Again a picture from a couple weeks ago. One of the initial test fit of the panel and check of wiring runs.
Date: 01/14/2012
Views: 2957
|
|
|
Fred fairing install 10.
Date: 07/06/2008
Views: 3048
|
|
|
IMG_2601
I took the float bowl off the starboard carb and removed the old gasket. The instructions with the new nitrile gasket said to apply some grease to hold the gasket in place while the bowl was replaced. I didn't have any grease but I had some light oil wh
Date: 05/30/2012
Views: 2889
|
|