|
AK_451
Date: 01/21/2009
Views: 2520
|
|
|
Homemade AOA gauge 2.
Date: 10/11/2010
Views: 2809
|
|
|
IMG_1420
Port aft fuselage where the tailwheel cables used to exit.
Date: 05/31/2011
Views: 2763
|
|
|
Door hinge rebates 55.
Date: 11/12/2009
Views: 2358
|
|
|
Wing connector 1.
Date: 04/27/2009
Views: 4727
|
|
|
DSCN4652Ann
Date: 08/13/2006
Views: 2507
|
|
|
DSC00887
Date: 04/15/2005
Views: 2899
|
|
|
Trim 1
Date: 03/26/2009
Views: 3612
|
|
|
05072003120108_G
Date: 12/31/1969
Views: 2181
|
|
|
First pass cutout.
Date: 07/19/2010
Views: 2592
|
|
|
IMGA0701
First wings L.E layed up and peel plyed. The blue foam is keeping in place a 90 degree strip which is keeping the end of the uni cloth bent under to aid bonding to the rear of the spar. A helpful tip from Mike Gregory.......Oh wanted to say it took 8 and
Date: 04/20/2013
Views: 6016
|
|
|
Autopilot_08
Date: 05/19/2008
Views: 3012
|
|
|
IMG_0101
Date: 12/19/2006
Views: 2369
|
|
|
DSCN3866
Date: 09/30/2005
Views: 2461
|
|
|
DSCN6197Ann
Date: 07/04/2007
Views: 3301
|
|
|
060202_Rigged4
Date: 12/31/1969
Views: 2371
|
|
|
EuropaMG03
Date: 12/31/1969
Views: 3644
|
|
|
IMG_6956 1
With the tank removed, the micro and urethane could be covered with cork. The cork serves to protect the tank from abrasion by the support materials. You can also see the strip of urethane applied to the top of the aluminum support for the tank ledge.
Date: 11/10/2013
Views: 4484
|
|
|
L1010180
Date: 03/17/2008
Views: 3562
|
|
|
DSCF0014
Date: 07/02/2009
Views: 3825
|
|