|
Oshkosh_2009_026
Date: 07/28/2009
Views: 5742
|
|
|
Control_Systems_65
Date: 01/23/2006
Views: 2834
|
|
|
IMG_7230
It was determined that a 1/4 in (6.4 mm) thick piece of rigid urethane foam topped with cork was needed to support the front "ledge" of the tank so it wouldn't sag.
Date: 01/26/2014
Views: 5399
|
|
|
IM003654
Date: 11/25/2007
Views: 3171
|
|
|
Port headrest aft cover 1.
Date: 07/09/2010
Views: 3158
|
|
|
IMG_6364Ann
Date: 12/11/2007
Views: 2757
|
|
|
DSCN4708Ann
Date: 09/03/2006
Views: 2536
|
|
|
Port mass balance 3.
Date: 09/17/2009
Views: 2242
|
|
|
Battery_box_5
Date: 01/12/2009
Views: 2825
|
|
|
LGLever04
Date: 02/04/2004
Views: 3037
|
|
|
05072003120155_G
Date: 12/31/1969
Views: 2204
|
|
|
03072003100535_G
Date: 12/31/1969
Views: 2788
|
|
|
13062003173338_G
Date: 12/31/1969
Views: 2305
|
|
|
IMG_9571post
The fuel lines were tied with tie-wraps and 1/2" (12.7 mm) rubber fuel hose lengths. The vent hose was tied in as well by running it through short lengths of fuel hose and using tie-wraps to hold the rubber hose and protect the vent line from chafin
Date: 06/12/2010
Views: 3740
|
|
|
IMG_1667
Date: 06/23/2004
Views: 4491
|
|
|
DSCN2274
Date: 03/18/2006
Views: 3077
|
|
|
IMG_0977Ann
Date: 08/06/2007
Views: 3269
|
|
|
IMG_2519
Date: 04/26/2006
Views: 2742
|
|
|
IMG_0103
Date: 12/20/2006
Views: 2550
|
|
|
090502_OilCooler3
Date: 12/31/1969
Views: 2934
|
|