|
DSCF0035
Date: 10/24/2010
Views: 2757
|
|
|
Fuse panel in picnic tray 1
Date: 09/24/2005
Views: 3091
|
|
|
CH11_4
Date: 12/31/1969
Views: 4747
|
|
|
Archer_Troy_1
Date: 11/29/1999
Views: 3105
|
|
|
IMG_0915post
I stuffed the brake line back into the aircraft, tied it all down and screwed it to the swing arm. Bolted the new caliper to the brake disk and torqued it to 90 in-lbs.
Date: 07/01/2010
Views: 2614
|
|
|
IMG_0097
Date: 12/13/2006
Views: 2600
|
|
|
attachment220
Date: 08/09/2004
Views: 3107
|
|
|
DSCF0111
Date: 10/27/2009
Views: 3631
|
|
|
Aft sill cover 5.
Date: 08/29/2010
Views: 2789
|
|
|
Archer_6_antenna_install_13
Date: 01/23/2009
Views: 3499
|
|
|
3 to 4 quarts of air trapped in tank of Monowheel unless you burp.
Date: 07/31/2011
Views: 1916
|
|
|
Bonding Port lift pin sockets 14.
Date: 10/28/2010
Views: 2958
|
|
|
InstrumentPanel85Ann
Date: 10/09/2005
Views: 3054
|
|
|
IMG_0285
Date: 04/16/2005
Views: 2499
|
|
|
Strobez_1
Date: 05/20/2009
Views: 3162
|
|
|
Calliper 2
The best solution is shown in this pic from Mike Parkin. A Banjo fitting. The Banjo bolt is straight threads, it lies low, out of the way of grabby things and is stoutly attached. So, I have a number of bits on order from various suppliers in an attem
Date: 06/23/2009
Views: 2914
|
|
|
011602_installing_flaps_to_wing
Date: 12/31/1969
Views: 3145
|
|
|
Ultimate_ventilator
Date: 07/02/2009
Views: 2463
|
|
|
IMG_8055Ann
Date: 07/05/2008
Views: 2745
|
|
|
CH23_11
Date: 05/10/2005
Views: 3067
|
|