|
DSCN6134
Date: 10/11/2009
Views: 3265
|
|
|
IMG_0172
Date: 04/14/2005
Views: 3074
|
|
|
061902_Throttle
Date: 12/31/1969
Views: 2616
|
|
|
1_24_06_28
Date: 11/29/1999
Views: 3911
|
|
|
DSCN6088
Date: 10/11/2009
Views: 2832
|
|
|
Repair screwup on starboard door 1.
Date: 10/20/2009
Views: 2766
|
|
|
IMG_2462
Here is the switch & breaker panel all nicely assembled. Don't know if you can tell, but the bottom row of breakers (except for the first one) are all upside down.
Date: 10/28/2011
Views: 3773
|
|
|
DSCN6208Ann
Date: 07/05/2007
Views: 2964
|
|
|
108_0818_IMG
Date: 10/12/2003
Views: 3869
|
|
|
Front lift pins Reduxed in.
Date: 10/16/2010
Views: 2837
|
|
|
Battery cutoff switches 1.
Date: 02/22/2010
Views: 3592
|
|
|
dsc09040
The gap from the bottom of the socket and the belly is as you see. The only way to get it all the way down was to lower the belly to 15" which was not considered an option. Belly hight is 16.0" with the axle width at 82.50" and axle cent
Date: 01/23/2013
Views: 8029
|
|
|
Hinge_Fairing_Mk2_Compared_to_Hinge
Date: 12/31/1969
Views: 3419
|
|
|
CockpitModuleBonding04
Date: 10/05/2003
Views: 3264
|
|
|
08122002112518_G
Date: 12/31/1969
Views: 2713
|
|
|
IMG_7230
It was determined that a 1/4 in (6.4 mm) thick piece of rigid urethane foam topped with cork was needed to support the front "ledge" of the tank so it wouldn't sag.
Date: 01/26/2014
Views: 5421
|
|
|
ThrottleHousingI02
Date: 02/29/2004
Views: 2431
|
|
|
NewSandersAnn
Date: 09/27/2004
Views: 3245
|
|
|
Bonding Port lift pin sockets 15.
Date: 10/29/2010
Views: 2679
|
|
|
CBM - 24 - INSTRUMENT PANEL
Date: 11/18/2013
Views: 1513
|
|