|
Fuel_System_11_001
Date: 06/08/2007
Views: 2678
|
|
|
Vertex_ant_17
Date: 03/15/2009
Views: 2946
|
|
|
fuel_4
Date: 12/31/1969
Views: 3377
|
|
|
06062002112642_G
Date: 12/31/1969
Views: 2777
|
|
|
j_Shoulder Harness Attachment Mod_4.jpg
Date: 03/22/2010
Views: 3480
|
|
|
Ducati Regulator Gilles 3
Date: 06/14/2010
Views: 2265
|
|
|
W18PlateReinforce02
Date: 06/06/2003
Views: 2672
|
|
|
DSCN6486
Date: 10/25/2009
Views: 2167
|
|
|
2006SnF017
Date: 04/07/2006
Views: 3015
|
|
|
IMG_1938
Date: 10/25/2004
Views: 3160
|
|
|
IMG_4610
Date: 05/07/2012
Views: 4810
|
|
|
DSC08800
starboard side
Date: 06/05/2012
Views: 8589
|
|
|
TrimSwitchesAnn
Date: 07/08/2004
Views: 2439
|
|
|
P1001027
Date: 10/31/2008
Views: 4965
|
|
|
DSC00221
Date: 04/10/2009
Views: 2911
|
|
|
3_snaps
The original snap base hardware is on the right. The new snap bases and mounting hardware are on the left. These 6-32 screw mount snap bases are from McMaster-Carr. I used big ol' AN970 washers for more support underneath and nyloc nuts so they don't c
Date: 06/23/2011
Views: 3634
|
|
|
DSCF0022_1_001
Date: 10/26/2009
Views: 4539
|
|
|
dscn1775
Date: 12/31/1969
Views: 2328
|
|
|
Front fuse conduit run 26.
Date: 10/01/2010
Views: 2710
|
|
|
IMG_7541ann
It took almost an hour to carefully and safely get the tap started in the aluminum brake. I sure didn't want to screw that up. Once I had a good start and the tap began to cut, I clamped the tap in the vice with the brake held high so chips fall out and
Date: 04/18/2010
Views: 2557
|
|