|
StrobeMount01_001
Date: 02/15/2004
Views: 2513
|
|
|
Airmaster01small
Date: 09/29/2005
Views: 3207
|
|
|
IMG_0007_001
Date: 05/06/2007
Views: 4061
|
|
|
Wing 5.
Date: 09/11/2009
Views: 2523
|
|
|
IMG_0921post
After I put the aircraft back into the hanger, I loosened the master cylinder and rotated it about 30 degrees to the starboard. I'll see how that works tomorrow.
Date: 07/01/2010
Views: 2758
|
|
|
IMG_0099post
Date: 09/03/2010
Views: 2433
|
|
|
Fuel_Y9_06_07
Date: 06/07/2009
Views: 2559
|
|
|
tank_breather
Date: 12/31/1969
Views: 3420
|
|
|
dsc09040
The gap from the bottom of the socket and the belly is as you see. The only way to get it all the way down was to lower the belly to 15" which was not considered an option. Belly hight is 16.0" with the axle width at 82.50" and axle cent
Date: 01/23/2013
Views: 8032
|
|
|
2005_2004_10_10_007_1
Date: 02/04/2009
Views: 2270
|
|
|
CH20_8
Date: 05/29/2005
Views: 3157
|
|
|
First ply being held flat, then a bit of heat added.
Date: 01/11/2010
Views: 3106
|
|
|
Cooling ideas Bud Y9-11
Date: 07/25/2010
Views: 2390
|
|
|
Ultimate_ventilator_2
Date: 07/02/2009
Views: 2507
|
|
|
IMG_0938Ann
Date: 07/29/2007
Views: 3377
|
|
|
Homegrown 10mm banjo for Aeroquip 666 -four.
Date: 10/30/2007
Views: 5297
|
|
|
DSC_0208
Date: 05/15/2008
Views: 3169
|
|
|
IMG_6630Ann
Date: 02/02/2008
Views: 2368
|
|
|
Schottky diode added 5 of 6.
Date: 08/12/2003
Views: 4609
|
|
|
IMG_0738
Date: 11/04/2005
Views: 3041
|
|