Fit baggage bay bulkhead - floor before fitting fairings Frans
Date: 12/08/2010
Views: 2148
Klaus-Building-His-Plane
Date: 10/20/2009
Views: 11620
imm030_31A
Date: 09/03/2009
Views: 7732
Newest Image
EAA SITE
Date: 08/23/2023
Views: 102461
Most Viewed Image
Wing fillet fairing
Date: 05/23/2007
Views: 536728
Dolly 13
I needed to remove some material from the top of the jack to allow pivots to fit.
I can't remember if I used a band-saw, hacksaw or both.
Then used a 3" round air sander and file to finish up.
If you look close you can see the Black Enamel line on the top, the damaged paint on the bottom is caused when the jack is collapsed.