|
Supplied nuts are too thick for the thin side of the tang 1.
Date: 10/14/2009
Views: 2482
|
|
Supplied nuts are too thick for the thin side of the tang 2.
Date: 10/14/2009
Views: 3014
|
|
4 nuts sanded down to .125"
Date: 10/14/2009
Views: 2989
|
|
This is the gap at high point on port door.
Date: 10/15/2009
Views: 3032
|
|
Gave the top of door a bit more clearance to fuse.
Date: 10/16/2009
Views: 2707
|
|
Port front tang perfect length.
Date: 10/16/2009
Views: 2655
|
|
Port front tang rebate prepared for closing gap a bit.
Date: 10/16/2009
Views: 2906
|
|
Port front tang rebate, going to use thin G-10 to cover gap.
Date: 10/16/2009
Views: 2768
|
|
Port front tang gap cover shaped.
Date: 10/16/2009
Views: 2923
|
|
Port front gap cover floxed in place.
Date: 10/16/2009
Views: 2947
|