|
|
Supplied nuts are too thick for the thin side of the tang 1.
Date: 10/14/2009
Views: 4618
|
|
|
Supplied nuts are too thick for the thin side of the tang 2.
Date: 10/14/2009
Views: 5077
|
|
|
4 nuts sanded down to .125"
Date: 10/14/2009
Views: 5139
|
|
|
This is the gap at high point on port door.
Date: 10/15/2009
Views: 5554
|
|
|
Gave the top of door a bit more clearance to fuse.
Date: 10/16/2009
Views: 5431
|
|
|
Port front tang perfect length.
Date: 10/16/2009
Views: 5307
|
|
|
Port front tang rebate prepared for closing gap a bit.
Date: 10/16/2009
Views: 5481
|
|
|
Port front tang rebate, going to use thin G-10 to cover gap.
Date: 10/16/2009
Views: 5389
|
|
|
Port front tang gap cover shaped.
Date: 10/16/2009
Views: 5755
|
|
|
Port front gap cover floxed in place.
Date: 10/16/2009
Views: 5538
|
