Mock up (really muck up) of new battery location 1.
Date: 07/24/2003
Views: 3626
Kember_s_mod_3
Date: 12/31/1969
Views: 4353
DSCF0002
Date: 07/02/2009
Views: 4807
Newest Image
EAA SITE
Date: 08/23/2023
Views: 159927
Started fitting port door.
Started fitting port door.
Plan is to fit with ~ 1/32" clearance all around, then mount hinges.
Shoot bolt bushings will be installed without glass or seal.
One ply carbon fiber will be laid up on upper and aft inside of door after gelcoat is removed.
Will not move lift strut position, (new position bulges door lower down), and install a passive pin and striker made out of stainless steel upper aft and middle bottom of door.
Pin and striker and lift strut will be installed before glass is bonded in place.
Gray gelcoat on doors and white gelcoat on windscreen rebate will be removed down to fiberglass where Plexiglass will be bonded to.
2 thin plies of model aeroplane glass will be applied to glass to door or fuse seam to help control cracking.
Y9-06-27