Oops, a few air bubles on aft mount reinforcemelay-up, drilled holes, filled with Aeropoxy, plugged with dry flox and Peel-Ply
Date: 11/30/2013
Views: 3629
IMG_6282post
Date: 08/09/2009
Views: 2606
14092002185614_G
Date: 12/31/1969
Views: 2206
Newest Image
EAA SITE
Date: 08/23/2023
Views: 85315
Token counterbore.
After the tang had a token counterbore for registration, drilled in the drill press 3/16" holes through tang and top hinge, spacer between hinges and lower hinge. Then clamped door in place and from the top drilled through spacer that was bonded to fuse and through the fuse using the 3/16" holes through everything as a guide. Perfect. Then took off door and counterbored tang to allow countersunk top hinge mounting nuts.
Bolt is only for temporary alignment.
Y9-10-14