Mill round slot in master cylinder 1 of 12

PUSH-PULL CABLE DETAIL: FRONT CABLE ATTACHMENT

1. Steel for... ... 8. Weight: 2.5... 9. Reinforce... 10. Besides a... 11. Mill round ... 12. Mill round ... 13. Mill round ... 14. Mill round ... ... 33. Front...

Random Images

IMG_0191[1]

Date: 09/12/2015 Views: 29999

Oil_Cooler_Hot_Air_Collector_Manifold

Date: 12/31/1969 Views: 6087

IMG_0130

Date: 12/04/2006 Views: 5025

Newest Image

EAA SITE

Date: 08/23/2023 Views: 693392

Mill round slot in master cylinder 1 of 12

The port side of the master cylinder needs a milled slot for flap push-pull cable clearance.

I used a two flute 1/2" ball end mill I purchased from McMaster.

Splinters from aluminium master cylinder chips are not as bad as 4130 chips, but still bad. Still best use a brush to sweep away chips, then vacuum before handling the part after material removal.

Y13-12-23

Date: 12/23/2013

Size:
Full size: 4896x3672

next last

first previous

Mill round slot in master cylinder 1 of 12

Photo Properties

summary details

Make	SONY	Model	DSC-HX20V
Aperture Value	f/3.5	Color Space	sRGB
Exposure Bias Value	0 EV	Exposure Program	Program
Flash	No Flash	Focal Length	6.68 mm
ISO	160	Metering Mode	Multi-Segment
Shutter Speed Value	1/40 sec	Date/Time	Mon 23 Dec 2013 03:12:46 PM UTC

next last

first previous