The magic number is 1.990" from the forward pillow block bearing to the grove.
Date: 12/13/2013
Views: 3795
DSCN6508
Date: 10/25/2009
Views: 2273
IM002674
Date: 10/29/2007
Views: 4418
Newest Image
EAA SITE
Date: 08/23/2023
Views: 89045
Mill round slot in master cylinder 1 of 12
The port side of the master cylinder needs a milled slot for flap push-pull cable clearance.
I used a two flute 1/2" ball end mill I purchased from McMaster.
Splinters from aluminium master cylinder chips are not as bad as 4130 chips, but still bad. Still best use a brush to sweep away chips, then vacuum before handling the part after material removal.