Bonding port front spacer to fuse with JB KWIK weld.
Date: 10/12/2009
Views: 3103
dscn0316
Date: 12/31/1969
Views: 2532
DSCN6203
Date: 10/11/2009
Views: 2879
Newest Image
EAA SITE
Date: 08/23/2023
Views: 160692
Mill round slot in master cylinder 11 of 12
Except for paint flight ready!
Note:
You need washers between the body of the master cylinder and the tunnel so you don't squish the dust seal. The manual calls for one wide area washer against the tunnel and two smaller washers on each hole. I will be using just one wide area washer and one smaller washer (seal still clears tunnel).