Gave the top of door a bit more clearance to fuse.
Date: 10/16/2009
Views: 2868
DSC_0095
Date: 02/04/2009
Views: 4300
Newest Image
EAA SITE
Date: 08/23/2023
Views: 206362
Making awful fit of lift pads correct 15.
Every time wings come off for rear pad adjustments, we drill, file and steer front lift pin hole closer to where it needs to be.
The Starboard is very close, the port still needs a little steering.
I am using a fractional drill bit set going 1 drill size at a time, pushing sideways if hole needs to be steered.
also using a jig to get angle of drill bit similar to that of the front lift pin.
Y10-10-14