Gearbox friction torque, when and how and it's mandatory!
Date: 08/19/2010
Views: 1723
DSCN6566
Date: 10/25/2009
Views: 2251
IMG_0289Ann
Date: 05/02/2008
Views: 4707
Newest Image
EAA SITE
Date: 08/23/2023
Views: 195382
Making awful fit of lift pads correct 38.
This is a clearer shot of the port aft lift pin receptacle to fuse fit.
The wing is swept aft here eliminating any clearance, but when things are where they should be, there is enough clearance for 4 BID and the final Redux / flox coating.
Again the rear lift pin receptacle is jammed neutral here and the lift pin is screwed out 1 full turn to allow any fine tuning adjustments later on.
I measured, and 1 full turn in on the lift pin equates to about 1/8" movement of the string at the root of wing by spar, (size E Dacron strung between wingtips).
Y10-10-18