Trying not to mar flap cross tube too bad with Upstops 2 of 7
Date: 12/26/2013
Views: 5276
IMG_6062post
Date: 08/09/2009
Views: 3032
Newest Image
EAA SITE
Date: 08/23/2023
Views: 160769
IM003630
Dug out foam from cover and floxed. Then sandwiched between 2 plates to hold edges flat. We dug out especially a lot on corners where we will drill and countersink for 8-32 screws. To insure that edges flush, used Ace Hardware plastic stepped shims. Handy and work well to get a desired parallel thickness.