Primative Pete
Silly if this whole exercise is for something that may not even be necessary! Of course we will be ridiculed. We should have tried aft location, if it didn't work just drill three 1/4" holes through the spar that could be done with an aviation mini 90 degree air powered drill through inspection hole, snaked 1/4" tubing through the holes and not worry about filling up holes and putting strength back to foam, then make 3 holes in wing just large enough to snake 1/4" hose through and mount 3 tube probe washer on Reduxed in place large area bent to proper angle studs on outside of wing. If we had any intention to fly quickly guess this would work, as would not having AOA info at all. But having such a logo associated is not very desirable.
|
Full size:
82x85
|