Trying not to mar flap cross tube too bad with Upstops 2 of 7
Date: 12/26/2013
Views: 4892
Newest Image
EAA SITE
Date: 08/23/2023
Views: 110902
Dolly 13
I needed to remove some material from the top of the jack to allow pivots to fit.
I can't remember if I used a band-saw, hacksaw or both.
Then used a 3" round air sander and file to finish up.
If you look close you can see the Black Enamel line on the top, the damaged paint on the bottom is caused when the jack is collapsed.