Vertical upright, swing-arm and generator install 7 of 7.
Date: 08/06/2003
Views: 4827
E_install_3
Date: 04/24/2009
Views: 3129
Battery cutoff switches 1.
Date: 02/22/2010
Views: 3880
Newest Image
EAA SITE
Date: 08/23/2023
Views: 159939
Foam_gap_2
This is a shot of starboard side. You can see foam gap above the bottom fuse flange and gap below the lower fuse flange joggle. I am reaching in from access hole just ahead of stabilator/spar. You can just about make out above my left elbow the gap on upper fuse where the seam begins to head up at a 45 degree angle, it is close to twice the gap where the quarter is. The port gap on the 45 degree is about the same as on the starboard. Since we are on the 45 degree angle seam, there is only about 1/2" contact between top and bottom fuse in that area that will be Reduxed.
Y9-03-25