Rigidize/size/atize top center of instrument module 2.
Date: 02/11/2010
Views: 3870
DSCN6499
Date: 10/25/2009
Views: 2695
Newest Image
EAA SITE
Date: 08/23/2023
Views: 160256
Port Bucket 1 of 1.
On the port Bucket since there is no derailer to deal with, position the 2 x 6 hard against the outboard face of the axle receptacle.
Then position the remaining two 1 x 2 x 5+3/4" with their inboard end-grain edges hard against the outboard face of the axle receptacle and their long edges hard against the axle extender.
Then drill clearance holes in the 1 x 2s for four Sheetrock screws (1+1/2" or 2") located 1" in from the end-grain edges of the 1 x 2s and screw the 1 x2s into the 2 x 6..