Both temperature indicators spot onto each other at 165°F.
Date: 02/16/2010
Views: 3836
IMG_1485s
Date: 06/10/2011
Views: 2542
Newest Image
EAA SITE
Date: 08/23/2023
Views: 85494
Running and connecting "Fat" wires 7.
Eric Jones recommends to solder as well. I used a 300 watt iron and 2% silver solder with a low melting point and some mild activated flux.
I tried to only solder the tip and not allow any solder to wick beyond the terminal.
Even though solder has a much higher resistance than copper, after crimping by applying solder it can lower overall resistance. This is especial true if crimp is not perfect.
Y1-02-26