Spar clamp that allows a little fore and aft movement
Date: 11/27/2013
Views: 5125
DSCF0635
Date: 07/28/2003
Views: 4561
41aileron_drive_jig
Date: 12/31/1969
Views: 2648
Newest Image
EAA SITE
Date: 08/23/2023
Views: 207631
ELT_ant_1
ELT antenna now flight ready. Just waiting on a 90 degree 50 ohm BNC adapter from ACS. Installed on tip of antenna is a small piece of silicone tubing, JB KWIKed and wrapped with some Kevlar thread for "poke" protection.
Length of antenna is 12". We made some radials (radius) 12" but ended up shy where fuse curves up and stopped at the height of the base of antenna with a horizontal leg. Shaved a few inches shy near transponder antenna radial and went a little shy on radials below the nav portion of AAE antenna on roof.
Y9-03-23