Oops, a few air bubles on aft mount reinforcemelay-up, drilled holes, filled with Aeropoxy, plugged with dry flox and Peel-Ply
Date: 11/30/2013
Views: 4157
IMG_6282post
Date: 08/09/2009
Views: 3129
Newest Image
EAA SITE
Date: 08/23/2023
Views: 192424
CH20_10
After test fitting the top fuselage I realized that the elevator did not have full range of motion. The balance arm would hit the fuselage top before achieving a minimum of 4 degrees down. After many attempts adjusting the arm I concluded the containment bracket was about an inch and a half too far forward. I removed the old mount and made a new one out of 4 ply BID