Port front tang rebate, going to use thin G-10 to cover gap.
Date: 10/16/2009
Views: 2525
DSCN5157
Date: 11/29/1999
Views: 3093
DSCN5432
Date: 07/20/2009
Views: 2656
Newest Image
EAA SITE
Date: 08/23/2023
Views: 110795
IMG_5106
I donĀ“t want to trim the door much further to save the aerodynamics. First I try hot air to bend the upper part of the door slightly. Limited success. In the the end I put opposing 45 degree edges on both door and rebate which provides the necessary clearance without making the gap much wider.