Going to taper sand away about half thickness of aluminium at tip 1.
Date: 10/22/2009
Views: 2983
TopFit27ann
Date: 05/29/2004
Views: 2601
Newest Image
EAA SITE
Date: 08/23/2023
Views: 193692
IMG_5308
Fitting the side piece, the first problem becomes visible. It is attached to the frame using two P clips. The upper one is fine, but the lower one sticks out from underneath the lower flange. This flange is narrower than the upper, which IS according to template. TIP- make the flange wider, if only locally.