|
IMG_0254post
Date: 09/14/2010
Views: 2718
|
|
IMG_0262post
Aircraft loaded onto the trailer ready for the two-day trip from Brandon, Florida to Denton, Texas and the hanger at KDTO.
Date: 09/14/2010
Views: 2673
|
|
IMG_0266ann
2010 09 14 - The aircraft on the trailer at the hotel ready for an early morning departure. The brace on the rudder proved to be a negative and was removed at the first stop. The rudder was also removed and strapped to the trailer. Thanks to Tommy Meye
Date: 09/14/2010
Views: 2743
|
|
IMG_1334ann
2010 10 18 No pics of unloading the Europa at home hanger. But a few days later I had the making for two new work benches to be constructed for the hanger. This is one of the work benches.
Date: 10/08/2010
Views: 2664
|
|
IMG_1335ann
And the second work bench with the port wing in place and ready for work. Took a long day to build the benches but they are worth all the effort.
Date: 10/08/2010
Views: 2303
|
|
IMG_0454ann
2010 10 16 - Since I had to replace the pitot/static tube anyway, I decided to make up a spacer to get the mount flush with the wing surface.
Date: 10/16/2010
Views: 3035
|
|
IMG_0456ann
2010 10 18 Mounted the new brake master cylinder with clecos to establish the location and size of the hole in the console needed for the brake levers.
Date: 10/18/2010
Views: 2941
|
|
IMG_0455ann
Hole cut in console to accomodate the new brake levers.
Date: 10/18/2010
Views: 3190
|
|
IMG_0457ann
2010 10 20 While in Florida, I had Bud go over the aircraft to see what issues he could find. One issue was the lack of spar pin reinforcements when the cockpit module was built.
Date: 10/20/2010
Views: 3092
|
|
IMG_0458ann
I've gone back to the build manual and made up a pair of reinforcements. Here marking where the upholstery will be cut to make a place for them.
Date: 10/20/2010
Views: 3012
|