Supplied nuts are too thick for the thin side of the tang 2.
Date: 10/14/2009
Views: 2822
DSCF0011_003
Date: 09/08/2009
Views: 2821
040702_ventduct15
Date: 12/31/1969
Views: 2257
Newest Image
EAA SITE
Date: 08/23/2023
Views: 112793
IMG_2685
I elected to make up a support structure from some 12" 1 1/2 x 1 1/2 wide aluminum angle i had in my aluminum bin. Cut two lengths 5 1/2" long and clamped them to the base well centered and drilled out holes matching the base. Attached them to the base with the existing hex cap screws. Two worked, two were too short. New ones on order along with better nuts.