Supplied nuts are too thick for the thin side of the tang 2.
Date: 10/14/2009
Views: 2831
DSCF0011_003
Date: 09/08/2009
Views: 2845
Newest Image
EAA SITE
Date: 08/23/2023
Views: 119359
IMG_0409Ann
Dived into the EIS wiring to check input wires to a number of functions. All seemed to be wired properly. Did find a discrepancy with the wiring instructions. One instruction sheet said to connect one RPM wire to the input and the other RPM wire to ground. Another instruction sheet said to connect RPM wire #13 to the input and RPM wire #26 to ground. Naturally, following the first instructions I connected #13 to ground and #26 to input. Gonna be ugly if I have to change those around.