Panel is warped on right side, will try some heat.
Date: 01/11/2010
Views: 4128
IMG_1104
Date: 03/17/2004
Views: 4369
Europa_tank_breather_bits
Date: 11/01/2001
Views: 4304
Newest Image
EAA SITE
Date: 08/23/2023
Views: 206462
DSCN6082Ann
Used the Dremel and a fine abrasive stone to finish removing the flange from the circular cooling holes.
Trimmed up a piece of blue foam to fill behind the lower lip of the cooling duct inlet. Supposedly, if you leave that lip, it causes turbulence in the cooling air causing poor airflow through the cooling duct which, in turn, can cause cooling problems. I don't need cooling problems here in the Texas summer. So I'm adding the smoothing ramp.