Kingsley 4 Undercarriage latched up viewed from below.
Date: 09/04/2005
Views: 4624
Brackets are mounted. Wayne is about half way done with PCB.
Date: 07/15/2010
Views: 3453
Newest Image
EAA SITE
Date: 08/23/2023
Views: 159651
IMG_2253Ann
Used the metal loops as a template to drill the holes. Began with a drill that just fit the hole in the metal loop. Then drilled the hole open to 1/4" for a tight fit of the rivet nut. Finally, used a large drill to de-burr the hole and clean up the edge.