DoorLatch58Ann
Bonded the fore bolt shoot guides into position. Started by scuff sanding the guides. Greased the inside of the guide to protect the bolt from sticking to the epoxy. Drilled holes over the guides where epoxy can be put in. Mixed a batch of Araldite 420 A/B. Applied the Araldite to the sides of the guides and slipped them in place over the bolt-shoots. Applied a bit more Araldite on the exposed guide. Mixed some FLOX with the remaining Araldite. Put the Araldite/FLOX in an industrial syringe and injected it over the top side of the guides.
|
Full size:
640x480
|