Trying not to mar flap cross tube too bad with Upstops 6 of 7
Date: 12/26/2013
Views: 7257
DSC00166_Texted
Date: 12/31/1969
Views: 3634
Newest Image
EAA SITE
Date: 08/23/2023
Views: 189308
EISWireFixAnn
I pulled back the mesh covering of the wires and cut the white wire and crimped on a butt splice. I cut the Red/Green wire and crimped it to the white wire going to the audio panel. Finally, I located a suitable length of white wire and spliced it to the white wire of Connector A. That part of the cable should be properly wired now.