Hard shot to get but pin just about to enter striker.
Date: 12/12/2009
Views: 3913
IMG_0742
Date: 11/04/2005
Views: 3129
Newest Image
EAA SITE
Date: 08/23/2023
Views: 160808
WingSet69
Finally, we measured the wing sweep. I do that by measuring from the point where the spar meets the wing tip cap back to the end of the horizontal stab torque tube. It should be the same for both sides. 176 7/8" on the port side and 176 7/8" on the starboard side. That's about as close as it gets. Cleaned up the tools and stuff and left it all to cure overnight.