Second and final pass of Port top wingskin bond on 10.
Date: 09/13/2010
Views: 2814
DSCN5167
Date: 11/29/1999
Views: 3427
Vent in window Ken Hill
Date: 04/30/2006
Views: 3797
Newest Image
EAA SITE
Date: 08/23/2023
Views: 164541
WingSetC06Ann
Decided to start the front lift pin internal reinforcements. Calls for a strip of blue foam 3"x16"x1/4" to be bonded to the inside of the cockpit. It runs vertically over the bolt heads for the front lift pin sockets. It will be covered with 3 plies of BID.
Started by cutting a 1/4" thick piece off a block of blue small-cell styrofoam. Cut the foam to strips 3"x20". Trimmed the foam to fit in place.
Port side fitted.