|
|
dsc08617
After removing the green tape.
Date: 04/14/2012
Views: 150147
|
|
|
dsc08618
Block and tackle used to hoist the front of the aircraft to aid in creating a jig. This hoist reduces the weight to 25%.
Date: 04/14/2012
Views: 36130
|
|
|
dsc08619
Roap tied to the engine mount frame to hoist the airframe.
Date: 04/14/2012
Views: 37241
|
|
|
dsc08620
Removal of the mono firewall.
Date: 04/14/2012
Views: 38092
|
|
|
dsc08621
Removal of the brake master for the mono.
Date: 04/14/2012
Views: 42662
|
|
|
dsc08622
Removed.
Date: 04/14/2012
Views: 42902
|
|
|
dsc08623
bungee cord removal.
Date: 04/14/2012
Views: 44308
|
|
|
dsc08625
Cutting out one of the ribs for the airframe. Going to use the mono trailer as the foundation of the jig. This will make is easy to level the airframe when getting ready for the trr-gear conversion. How do you like my work bench?
Date: 04/14/2012
Views: 31935
|
|
|
dsc08626
Put in a 2x4 in the main wing spar tunnel and located the pins. This was only used to aid in keeping the plane from tipping.
Date: 04/14/2012
Views: 32528
|
|
|
dsc08627
The monowheel landing gear is in the up position and resting on the main wheel with some of the weight held by the block and tackle. This was taken just before putting on the braces to keep her from rolling. Been trying to get rid of that tv in the back
Date: 04/14/2012
Views: 29452
|
