Bonding port front spacer to fuse with JB KWIK weld.
Date: 10/12/2009
Views: 3059
dscn0316
Date: 12/31/1969
Views: 2500
Newest Image
EAA SITE
Date: 08/23/2023
Views: 154260
dsc08640
OK not the best shot but here you can see I used the jack to move the rear rib in place under the airframe being careful not to pinch the belly. I then secured the rib in place but using some drywall screws in the 2x6. This way any weight will be transfered to the i-beam.
OK not the best shot but here you can see I used the jack to move the rear rib in place under the airframe being careful not to pinch the belly. I then secured the rib in place but using some drywall screws in the 2x6. This way any weight will be transfered to the i-beam.