Front Starboard fuse stiffening for lift socket 12.
Date: 10/25/2010
Views: 3425
Newest Image
EAA SITE
Date: 08/23/2023
Views: 105222
dsc09022
Here you see I used bondo on the shims and screwed them down into the block. The shims made sure the guide was level. Also note the hole drilled in the Aluminum angle and the shim. This is where I fixed the guide for the curing stage to ensure nothing moved.
Here you see I used bondo on the shims and screwed them down into the block. The shims made sure the guide was level. Also note the hole drilled in the Aluminum angle and the shim. This is where I fixed the guide for the curing stage to ensure nothing moved.