Wanted to make a copy of B16 to make the cuts on before I cut the actual B16 part.
Date: 04/03/2016
Views: 12452
DSC00868
Date: 04/15/2005
Views: 2775
Fairings removable for glider wing Frans
Date: 12/02/2010
Views: 2247
Newest Image
EAA SITE
Date: 08/23/2023
Views: 98011
dsc09029
Gear legs clamped in place, no toe in/out per Bud. You cant see it in the photo but I used a green tip .30 bullet as a homemade plum bob that was attached to dead center of the aluminum angle. This helped us keep the guide over the center line. Oh make sure you clean up the 420, I didn't see that spot on the clamp and it was difficult to remove even with a smooth surface.
Gear legs clamped in place, no toe in/out per Bud. You cant see it in the photo but I used a green tip .30 bullet as a homemade plum bob that was attached to dead center of the aluminum angle. This helped us keep the guide over the center line. Oh make sure you clean up the 420, I didn't see that spot on the clamp and it was difficult to remove even with a smooth service.