|
IMG_0237
Fuselage in the truck
Date: 02/01/2014
Views: 8133
|
|
|
IMG_0187.JPG (2)
Workshop kitted out. All done in 3 weeks!
Date: 04/13/2014
Views: 9181
|
|
|
IMG_0228
Andy & I having a good breakfast prior to the start of our trip to South Wales
Date: 01/31/2014
Views: 8369
|
|
|
DSC00160
Foam removed from rear bulk head ready for plywood inserts
Date: 09/03/2015
Views: 8363
|
|
|
IMG_0406
Date: 04/17/2015
Views: 7660
|
|
|
DSC00157
Instructions state that rod should be reamed to 0.375" but it needed to be reamed out 0.428" to fit push rod.
Date: 09/03/2015
Views: 7201
|
|
|
DSC00149
Winch installed in garage
Date: 09/01/2015
Views: 8910
|
|
|
IMG_0414
Date: 04/18/2015
Views: 9036
|
|
|
IMG_0191[1]
Date: 09/12/2015
Views: 7468
|
|
|
DSC00214
blue foam placed in rudder to fill void
Date: 09/08/2015
Views: 8549
|
|
|
IMG_0235
Date: 02/01/2014
Views: 7818
|
|
|
IMG_0391
Date: 04/10/2015
Views: 7427
|
|
|
Rivets
Next problem. Once the push rod end was fitted and drilled according to the manual the rivets provided were too short to go through the whole structure. Awaiting a response from Europa
Date: 09/03/2015
Views: 7211
|
|
|
IMG_0390
Date: 04/10/2015
Views: 7340
|
|
|
DSC00212
Marking position for bracket on rear bulk head
Date: 09/08/2015
Views: 10734
|
|
|
DSC00229
Still some work to do but happy so far.
Date: 09/10/2015
Views: 10799
|
|
|
DSC00228
Had to remove more of the rudder than I wanted so build up rudder trailing edge by attaching peel ply to the outside of the rudder and build up trailing edge using flox around the edge and an initial 2 ply of bid. i'll apply an additional 2 ply after the
Date: 09/10/2015
Views: 6906
|
|
|
IMG_0229
At Steve's workshop packing the kit ready for transportation
Date: 01/31/2014
Views: 7852
|
|
|
IMG_0412
Date: 04/17/2015
Views: 7981
|
|
|
Torque tube
Took some measurements and sent query to Europa. Response was I required the issue 1 TP38s
Date: 09/03/2015
Views: 4719
|
|