First ply being held flat, then a bit of heat added.
Date: 01/11/2010
Views: 3075
IMG_0248post
Date: 09/14/2010
Views: 3227
IMG_1557
Date: 06/07/2004
Views: 3032
Newest Image
EAA SITE
Date: 08/23/2023
Views: 86366
Tie-bar 34.
We made BID oversized as it distorts quite a bit when smoothed out.
Difficult at best trying to cut BID in place even though we had green tape to guide us.
We shot for at least giving what manual calls for 1+11/16" overlap onto the cockpit module.
This is the second 2 BID layup. We waited for the first 2 BID to tack up pretty good before laying up the second 2 BID. I think because the first 2 BID is rougher than the scuff sanded wood or fiberglass, the second 2 BID stays in place better.
Y10-11-18