|
CBM - 21M - LANDING GEAR MOUNTING FRAME
Date: 11/18/2013
Views: 1429
|
|
|
Headrest_1
Date: 02/27/2009
Views: 3437
|
|
|
MG_1658
Date: 07/09/2006
Views: 2972
|
|
|
IMG_0040
Date: 03/16/2007
Views: 4243
|
|
|
040702_reinforcment_2
Date: 12/31/1969
Views: 2471
|
|
|
IMG_2065
The GRT Sport has arrived and almost all the instruments have been set in their panels. This is a test fit. It was necessary to adjust the big opening in the main for clearance of some of the various instruments.
Date: 11/05/2011
Views: 5415
|
|
|
DSCF0076
Date: 08/16/2008
Views: 2721
|
|
|
P1010027a
Date: 11/29/1999
Views: 3656
|
|
|
IMG_0328
Date: 04/17/2005
Views: 2649
|
|
|
Runway_31_Prestwick_EGPK
Date: 10/16/2009
Views: 3165
|
|
|
DSCN6324
Date: 10/11/2009
Views: 2217
|
|
|
IMG_8244Ann
Date: 07/21/2008
Views: 2487
|
|
|
InstrumentPanel31Ann
Date: 05/27/2004
Views: 2283
|
|
|
Front Cable Mount with Lever in Up Position
Date: 12/12/2013
Views: 3575
|
|
|
Upright reinforced joints 1 of 2.
Date: 08/12/2003
Views: 4613
|
|
|
dsc08627
The monowheel landing gear is in the up position and resting on the main wheel with some of the weight held by the block and tackle. This was taken just before putting on the braces to keep her from rolling. Been trying to get rid of that tv in the back
Date: 04/14/2012
Views: 8712
|
|
|
IMG_1664
Date: 06/22/2004
Views: 5147
|
|
|
dscn0604
Date: 12/31/1969
Views: 2844
|
|
|
IMG_0148
Date: 12/04/2006
Views: 2781
|
|
|
IMG_9571post
The fuel lines were tied with tie-wraps and 1/2" (12.7 mm) rubber fuel hose lengths. The vent hose was tied in as well by running it through short lengths of fuel hose and using tie-wraps to hold the rubber hose and protect the vent line from chafin
Date: 06/12/2010
Views: 3704
|
|