Rigging descision 2.5 Starboard, 2.4 Port and droop port flap .110 at root 1.
Date: 10/25/2010
Views: 3040
Mixing stick sanding board 2.
Date: 10/05/2010
Views: 5101
Newest Image
EAA SITE
Date: 08/23/2023
Views: 207031
Tie-bar 48.
The two bolts that catch the tie-bar are drilled at a slight angle off 90°.
Not too bad, but I will deal with that by using self leveling washers from www.mcmaster.com. Details later on.
This offset drill allows the bit to wobble round a bit.
Y10-11-20