Magnetic oil plug check and 5 year rubber part replacement 2
Date: 08/19/2010
Views: 2288
IMG_2604
Date: 05/30/2012
Views: 5293
DSCN3560
Date: 12/31/1969
Views: 2568
Newest Image
EAA SITE
Date: 08/23/2023
Views: 194163
Cu14
Clamped between vise (end to end) in Bridgeport, began "incline" cutting with a 2 fluted end mill. At first .020" cuts, then when half way through first side, dropped down to .010" cuts, then second side began with .010" cuts and went down to .005" cuts. Got an OK finish with no chatter or flexing. Finished thickness of bypass is .090" which nets me a slight lower resistance than #4 Tefzel wire!
Y9-01-02